After painting, drying the inside of the canopy I glue it in place.
After checking my work I realise that the top of the pilots headgear press to the clear canopy.
Making a small but visible dot.
Remove the canopy and maybe destroy more as to make it good?
I decide, shit happen. And leave it as it is.
A few days later it was on to do the dirt splashes to both engine nacelle with a well known method. Using the fingers to tension a wet paint brush for the splashes.
One splash hit exactly the point there the spot of the pilot`s headgear show through the clear canopy.
If you will do that. It won`t work.
What a stroke of fortune!
